Nite-Ize - CamJam® XT™ Aluminum Cord Tightener - With Coyote Paracord

PRODUCT INFORMATION

The CamJam XT aluminum rope & cord tighteners feature Nite Ize signature, knot-free CamJam tightening and tensioning technology. Available in two heavy-duty sizes and built from durable, cast aluminum, this rugged combination of carabiner and cam mechanism is designed to tighten, tension, connect, and secure serious loads up to 280 and 500 lbs respectively.

The CamJam XT products feature a carabiner clip and gate on one end, and a rotating cam mechanism on the other. This clever design allows the CamJam XT to be configured in either a Fixed End or a Loop System to securely tie down lumber, gear, and other heavy loads. In both systems, the CamJam XT can be easily adjusted and re-adjusted time and again to tackle a multitude of tie-down projects over the years. The XT holds cord from 1/16"-3/16" [2mm-5mm] in width, and the XT Large holds rope with a diameter of 1/8”-3/8” [3mm-9mm].

To use the Fixed End System: simply anchor the carabiner to any hook, D-ring, or loop, and feed the cord or rope through the cam until you've reached the desired level of tension. Next, pull the cord firmly and the cam locks into place and stays that way until you release it.

To use the Loop System: Tie a knot to create a loop in one end of your rope or cord. Clip the CamJam XT into that loop, then pull the other end or rope through the cam mechanism. This loop system enables you to bundle or wrap heavy loads and easily secure them.

To Release the Cam: simply rotate the cam lock lever and pull your rope or cord upward.

PRODUCT DETAILS

Allows you to tighten, tension, connect and secure heavy loads by simply pulling your rope or cord through the cam mechanism

Easy to adjust and release tension by rotating the cam lock lever

Available in two sizes: XT & XT Large

Available with 10 ft paracord in Coyote

Two attachment methods for ultimate versatility - Loop System and Fixed End System

Achieve and maintain high tension without knots

Made of durable cast aluminum for heavy loads

CamJam XT Single Pack Load Limit: 280 lbs | 127 kg, Break Strength: 837 lbs | 380 kg

CamJam XT With Coyote Paracord Working Load Limit: 100 lbs | 45 kg, Break Strength: 300 lbs | 136 kg

CamJam XT Large Single Pack Load Limit: 500 lbs | 227kg, Break Strength: 1500 lbs | 680kg

CamJam XT fits rope sizes: 1/16" - 3/16" | 2mm - 5mm, CamJam XT Large fits rope sizes up to 3/8" | 9.5mm

CamJam XT Dimensions: 1.3" x 2.5" x 0.75" | 33.6mm x 63.1mm x 19mm

CamJam XT Weight: 1.34 oz | 38g

CamJam XT With Coyote Paracord Dimensions: 1.32" x 120" x 0.75" | 33.6mm X 3048mm X 19mm

CamJam XT With Coyote Paracord Weight: 2.33 oz | 66 g

CamJam XT Large Dimensions: 1.86" x 3.8" x .90" | 47.3mm x 98mm x 22.75mm

CamJam XT Large Weight: 3.2 oz | 91g

WARNING: NOT FOR USE WHERE DISENGAGEMENT COULD RESULT IN BODILY INJURY OR PROPERTY DAMAGE. NOT FOR CLIMBING.

YOU MAY ALSO LIKE...

https://www.youtube.com/watch?v=nxAkXtAz4iU